Foundation 5 · 5E · Thermodynamics and kinetics

, , and control

Sources ↗

changes the route and rate toward , while regulation how much active is available.

Mechanisms and classes

stabilize relative to , lowering activation barriers without changing the ’s or overall . position and can use – , transient , metal- effects, or stabilization. changes structure during binding rather than requiring a completely rigid lock. The familiar six classes are , , , , , and ligases; the modern classification also includes translocases for movement across or compartments. Specificity can distinguish , positions, and stereoisomers.

Source: Biology 2e §6.5 — Enzyme action · Chemistry 2e §12.7 — Catalysis and reaction diagrams · Biochemistry Free For All §4.1 — Enzyme kinetics

and local environment

A is a required nonprotein component, often a metal or an organic . Some bind transiently as cosubstrates, whereas tightly associated prosthetic groups remain with the . Vitamins can supply precursors: niacin supports NAD, riboflavin supports , and pyridoxine supports . Temperature initially accelerates many but can destabilize structure at higher values. changes -group and , altering binding or chemical steps. Activity measured under one condition need not predict performance at another , , or level.

Source: Biology 2e §6.5 — Enzyme action · Chemistry 2e §12.7 — Catalysis and reaction diagrams · Biochemistry Free For All §4.1 — Enzyme kinetics

and inhibition

For a simple , v = [S]/(Km + ), with = [E]total and v = /2 at = Km. raises apparent Km without lowering ; lowers both by the same factor; lowers with unchanged Km. lowers and changes Km according to relative binding to free and . can give and do not follow this simple equation. Km is not generally identical to a binding .

Source: Biology 2e §6.5 — Enzyme action · Chemistry 2e §12.7 — Catalysis and reaction diagrams · Biochemistry Free For All §4.1 — Enzyme kinetics

Regulation changes state

regulators bind coupled to the and shift populations, changing response or activity. lets a pathway reduce an earlier step, limiting unnecessary flux. Covalent modifications such as can activate one and inhibit another; the outcome depends on the . activation of a is effectively irreversible for that , unlike many reversible modifications. Regulation can also change abundance or location, so an activity change does not automatically identify direct active-site inhibition.

Source: Biology 2e §6.5 — Enzyme action · Chemistry 2e §12.7 — Catalysis and reaction diagrams · Biochemistry Free For All §4.1 — Enzyme kinetics

Apply it

Try before revealing the answer. An has = 80 /min and Km = 20 . Find v at = 20 . A doubles apparent Km; find v at the same and compare the saturating limit.

Worked answer

Initially v = 80×20/(20+20) = 40 /min. With apparent Km = 40 , v = 80×20/(40+20) ≈ 26.7 /min. At sufficiently high both approach 80 /min, assuming the ideal reversible competitive model.

Source: Biology 2e §6.5 — Enzyme action · Chemistry 2e §12.7 — Catalysis and reaction diagrams · Biochemistry Free For All §4.1 — Enzyme kinetics

Biology 2e §6.5 — action — figures and tables

This plot shows that a catalyst decreases the activation energy for a reaction but does not change the Gibbs free energy.
lower

Figure 6.15 Enzymes lower the reaction's activation energy but do not change the reaction's free energy.

Mary Ann Clark, Matthew Douglas, and Jung Choi, Biology 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
In this diagram, a substrate binds the active site of an enzyme and, in the process, both the shape of the enzyme and the shape of the substrate change. The substrate is converted to products that then leave the enzymes active site.
binding and

Figure 6.16 According to the induced-fit model, both enzyme and substrate undergo dynamic conformational changes upon binding. The enzyme contorts the substrate into its transition state, thereby increasing the reaction's rate.

Mary Ann Clark, Matthew Douglas, and Jung Choi, Biology 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Source: Biology 2e §6.5 — Enzyme action

Chemistry 2e §12.7 — and diagrams — figures and tables

A graph is shown with the label, “Extent of reaction,” appearing in a right pointing arrow below the x-axis and the label, “Energy,” in an upward pointing arrow just left of the y-axis. Approximately one-fifth of the way up the y-axis, a very short, somewhat flattened portion of both a red and a blue curve are shown. This region is labeled “Reactants.” A red concave down curve extends upward to reach a maximum near the height of the y-axis. From the peak, the curve continues downward to a second horizontally flattened region at a height of about one-third the height of the y-axis. This flattened region is labeled, “Products.” A second curve is drawn in blue with the same flattened regions at the start and end of the curve. The height of this curve is about two-thirds the height of the first curve and just right of its maximum, the curve dips low, then rises back and continues a downward trend at a lower height, but similar to that of the red curve. A horizontal dashed straight line extends from the point where both curves start in the “Reactants” region. A double sided arrow extends from the “Products” region at the end of both curves to this horizontal dashed line. This is labeled “capital delta H.” A double sided arrow extends from the dashed horizontal line to the peak of the red concave down curve. This arrow is labeled “E subscript a.” Another double sided arrow extends from the dashed horizontal line to the peak of the blue curve. This arrow is labeled “E subscript a.”
A changes the

Figure 12.19 Reaction diagrams for an endothermic process in the absence (red curve) and presence (blue curve) of a catalyst. The catalyzed pathway involves a two-step mechanism (note the presence of two transition states) and an intermediate species (represented by the valley between the two transitions states).

Paul Flowers, Klaus Theopold, Richard Langley, and William R. Robinson, Chemistry 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
In this figure, two graphs are shown. The x-axes are labeled, “Extent of reaction,” and the y-axes are labeled, “Energy ( k J ).” The y-axes are marked off from 0 to 50 in intervals of five. In a, a blue curve is shown. It begins with a horizontal segment at about 6. The curve then rises sharply near the middle to reach a maximum of about 32 and similarly falls to another horizontal segment at about 10. In b, the curve begins and ends similarly, but the maximum reached near the center of the graph is only 20.
Example 12.15: comparing activation energies Paul Flowers, Klaus Theopold, Richard Langley, and William R. Robinson, Chemistry 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
In this figure, two graphs are shown. The x-axes are labeled, “Extent of reaction,” and the y-axes are labeledc “Energy (k J).” The y-axes are marked off from 0 to 100 at intervals of 10. In a, a blue curve is shown. It begins with a horizontal segment at about 10. The curve then rises sharply near the middle to reach a maximum of about 91, then sharply falls to about 52, again rises sharply to about 73 and falls to another horizontal segment at about 5. In b, the curve begins and ends similarly, but the first peak reaches about 81, drops to about 55, then rises to about 77 before falling to the horizontal region at about 5.
Check Your Learning: two-step Paul Flowers, Klaus Theopold, Richard Langley, and William R. Robinson, Chemistry 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Source: Chemistry 2e §12.7 — Catalysis and reaction diagrams

Biochemistry Free For All §4.1 — — figures and tables

Initial reaction rate rises with substrate concentration and approaches a plateau.
curve

Figure 4.18 - Kinetics of an enzyme obeying Michaelis-Menten kinetics. Image by Aleia Kim

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. Image by Aleia Kim · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
Product concentration rises approximately linearly at low substrate concentration when measured after a fixed short reaction time.
formation at low

Figure 4.19 - Linear relationship between [P] and [S] at low [S]

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
Initial rate equals Vmax times substrate concentration divided by Km plus substrate concentration.
equation Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
A saturation curve marks Vmax, half Vmax, and the corresponding substrate concentration Km.
Reading and Km

Figure 4.20 - Vmax, Vmax/2, and Km

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
An original table image compares turnover numbers for several enzymes.
Turnover numbers for several

Figure 4.21 - Kcat (turnover number) values for several enzymes. Image by Aleia Kim

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. Image by Aleia Kim · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
A double-reciprocal plot marks the slope Km/Vmax, y-intercept 1/Vmax, and x-intercept minus 1/Km.

Figure 4.26 - A Lineweaver-Burk plot of 1/V₀ vs 1/[S]. Image by Aleia Kim

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. Image by Aleia Kim · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Source: Biochemistry Free For All §4.1 — Enzyme kinetics

231 terms, alphabetically ordered

3′ end · ·

The end of a nucleic- strand associated with the sugar’s 3′ position. extends a strand at a free .

Read explanation · OpenStax ↗
3′ hydroxyl group · · ·

The at the sugar’s 3′ carbon that attacks the incoming ’s during strand extension.

Read explanation · OpenStax ↗
A site · ·

The site that accepts most incoming during elongation and at termination.

Read explanation · OpenStax ↗
Acid · ·

In the Brønsted–Lowry model, a substance that can donate a . Acidic have a higher activity than water.

Read explanation · OpenStax ↗
Activation energy ·

The energy barrier that must overcome to reach a and undergo .

Read explanation · OpenStax ↗
Active catalytic-site concentration ·

The total of active sites used to calculate from . It equals active when each has one site.

Read explanation · Biology LibreTexts ↗
Active site

The region of an that binds its and carries out .

Read explanation · OpenStax ↗
Adenine

A that pairs with in and in .

Read explanation · OpenStax ↗
Adenosine triphosphate

An energy-carrying ; its powers many cellular processes, including cycles.

Read explanation · OpenStax ↗
Allosteric regulation · · ·

A change in activity caused by communication between . An can activate or inhibit; allostery does not imply a particular inhibition pattern.

Read explanation · Biology LibreTexts ↗
Alpha carbon · ·

The central carbon next to the carboxyl carbon. In a standard it binds an , hydrogen, and .

Read explanation · OpenStax ↗
Alpha helix · · · · · ·

A helical stabilized by between a oxygen and an hydrogen four later.

Read explanation · OpenStax ↗
Amide · · ·

A group containing a carbon bonded to nitrogen. are amide linkages.

Read explanation · OpenStax ↗
Amino acid

A building block containing amino and and a characteristic .

Read explanation · OpenStax ↗
Amino acid residue · ·

The part of an incorporated into a chain. Residue can also describe another building block within a larger .

Read explanation · OpenStax ↗
Amino group · · ·

A nitrogen-containing . A free ’s amino group is typically (NH₃⁺) near physiological ; ’s ring nitrogen is an exception to this formula.

Read explanation · OpenStax ↗
Aminoacyl-tRNA · ·

A covalently linked to an at its , ready to deliver that during .

Read explanation · OpenStax ↗
aminotransferase ·

An transferring an between an and a keto .

Read explanation · OpenStax ↗
Amphipathic

Having both a region and a region, as in a or .

Read explanation · OpenStax ↗
Analytical standard ·

A material with a known identity or amount used to compare or calibrate measurements.

Read explanation · Agilent ↗
Anion ·

An with a negative net .

Read explanation · OpenStax ↗
Anticodon

A triplet that pairs to an . The anticodon for 5′-AUG-3′ is aligned 3′-UAC-5′, or written 5′-CAU-3′.

Read explanation · NCBI Bookshelf / Garland Science ↗
Antiparallel

Running in opposite directions, as with two strands or neighboring strands in some .

Read explanation · OpenStax ↗
Aqueous solution ·

A in which water is the .

Read explanation · OpenStax ↗
Aromatic

Containing a cyclic, with . , , and have aromatic .

Read explanation · OpenStax ↗
Atom

The smallest unit of an element that retains its chemical identity; it has a surrounded by .

Read explanation · OpenStax ↗
Benzene ring

A six-carbon ring with .

Read explanation · OpenStax ↗
Benzyl group

A attached through a –CH₂– group; part of ’s .

Read explanation · OpenStax ↗
Beta sheet · · · · · ·

A made of aligned segments connected by ; strands may be parallel or .

Read explanation · OpenStax ↗
bicarbonate ·

The HCO3− , a major extracellular component and form of carbon dioxide transport.

Read explanation · OpenStax ↗
Binding affinity ·

The strength of a binding interaction between . For simple binding, a smaller means higher affinity.

Read explanation · OpenStax ↗
Binding site

A region of a where another interacts selectively.

Read explanation · OpenStax ↗
Biomolecule

A made by or involved in living systems, including , , , and .

Read explanation · OpenStax ↗
Blotting ·

Transfer of separated or to a so a specific target can be detected.

Read explanation · Thermo Fisher ↗
Brønsted–Lowry base · · · · · · · · · · ·

In the Brønsted–Lowry model, a substance that can accept a . Basic solutions have lower activity than water.

Read explanation · OpenStax ↗
Buffer ·

A that resists changes when small amounts of or are added, commonly through a weak and its .

Read explanation · OpenStax ↗
Calibration

Establishing the relation between a measured signal and known values or .

Read explanation · Agilent ↗
Carbohydrate

A class of including sugars and their , used for energy storage, structure, and recognition.

Read explanation · OpenStax ↗
carbonic anhydrase

An accelerating the interconversion of carbon dioxide and water with and .

Read explanation · OpenStax ↗
Carbonyl group · ·

A carbon double-bonded to oxygen, C=O; present in and many other .

Read explanation · OpenStax ↗
Carboxyl group · ·

An , COOH. In free it is usually to COO⁻ near physiological .

Read explanation · OpenStax ↗
Catalyst · ·

A substance that speeds a by providing a pathway with lower and is regenerated rather than consumed overall.

Read explanation · OpenStax ↗
Catalytic efficiency · ·

The ratio kcat/Km, describing performance at low . Units are ⁻¹ time⁻¹, commonly M⁻¹ s⁻¹.

Read explanation · IUBMB ↗
Cation ·

An with a positive net .

Read explanation · OpenStax ↗
Chemical compound ·

A substance containing of two or more different chemically combined in a definite composition.

Read explanation · OpenStax ↗
Chemical element

A substance defined by having the same number of , such as carbon or oxygen.

Read explanation · OpenStax ↗
Chemical reaction ·

A process that rearranges and chemical bonds, converting into .

Read explanation · OpenStax ↗
Chromatin

The complex of and associated , including , in .

Read explanation · OpenStax ↗
Chromatography

Separation of mixture components by their different interactions with a and a moving .

Read explanation · Waters ↗
Chromatography resin ·

The solid or beads in a column, often carrying chemical groups that determine separation behavior.

Read explanation · Cytiva ↗
Chromosome ·

An organized with associated that carries . A replicated chromosome has two .

Read explanation · OpenStax ↗
Codon

A sequence of three that specifies an or a stop signal.

Read explanation · OpenStax ↗
Coenzyme

An organic that helps an catalyze a , often by carrying or chemical groups.

Read explanation · OpenStax ↗
Cofactor

A nonprotein component needed for an to , such as a metal or an organic .

Read explanation · OpenStax ↗
Competitive inhibition · ·

In the simple reversible model, binds free and excludes binding. Apparent Km increases while stays unchanged.

Read explanation · Biology LibreTexts ↗
Concentration

The amount of a substance in a specified volume or mass of mixture.

Read explanation · OpenStax ↗
Conformation ·

A spatial arrangement accessible by rotations and other motions that do not require breaking .

Read explanation · NCBI Bookshelf ↗
conjugate base

Species formed when an loses one .

Read explanation · OpenStax ↗
Conjugated system ·

Adjacent orbitals that allow to be distributed across several , often through alternating single and multiple bonds.

Read explanation · OpenStax ↗
Cooperativity · ·

An interaction in which binding at one site changes binding at other sites. Positive cooperativity can produce a response.

Read explanation · Biology LibreTexts ↗
cosubstrate

that participates as a diffusible partner and is regenerated in another .

Read explanation · OpenStax ↗
Covalent bond · ·

A bond in which share pairs. and are covalent.

Read explanation · OpenStax ↗
Cysteine ·

An with a . Two cysteines can form a .

Read explanation · OpenStax ↗
Cytosine

A in and that pairs with . can convert it to .

Read explanation · OpenStax ↗
Deamination

Removal of an . Deamination of produces and can change genetic information if unrepaired.

Read explanation · Biology LibreTexts / Oregon State University ↗
Denaturation · ·

Loss of a ’s , often with . This usually preserves the chain’s .

Read explanation · NCBI Bookshelf ↗
Deoxyribonucleic acid

The that stores genetic information used to specify and sequences.

Read explanation · OpenStax ↗
Deprotonation

Removal of a from a or group; this changes its by minus one.

Read explanation · OpenStax ↗
Detergent

An substance that can associate with both water and material; detergents can disrupt or interactions.

Read explanation · Thermo Fisher ↗
determination

Developmental commitment to a cell fate before all specialized features necessarily appear.

Read explanation · OpenStax ↗
Diffusion

Net spreading of particles down a due to random molecular motion.

Read explanation · OpenStax ↗
Dissociation · ·

Separation of a chemical species or molecular complex into smaller components; dissociation releases a .

Read explanation · OpenStax ↗
Dissociation constant · ·

An for complex . For E + S ⇌ , Kd = [E]/[]; a smaller value indicates tighter binding under the stated conditions.

Read explanation · IUBMB ↗
Disulfide bond · · ·

A covalent sulfur–sulfur bond formed by of two , which can stabilize structure.

Read explanation · NCBI Bookshelf ↗
DNA polymerase ·

An that synthesizes 5′ to 3′ using a template and a with a free .

Read explanation · OpenStax ↗
DNA replication

Copying so genetic information can be passed to daughter cells. Each guides a complementary new strand.

Read explanation · OpenStax ↗
Effector

A that changes a ’s activity or binding behavior, often by stabilizing a particular .

Read explanation · Biology LibreTexts ↗
Electric charge · · ·

An electrical property that can be positive or negative. Opposite charges attract and like charges repel; net charge is the sum of all charges on a particle.

Read explanation · OpenStax ↗
Electron

A negatively subatomic particle. Electron sharing and transfer determine much of chemical bonding.

Read explanation · OpenStax ↗
Electron delocalization ·

Distribution of across several rather than confinement to one or bond.

Read explanation · OpenStax ↗
Electronegativity ·

An ’s tendency to attract shared in a chemical bond. Unequal attraction can make a bond .

Read explanation · OpenStax ↗
Electrostatic interaction · ·

Attraction between opposite electrical or repulsion between like .

Read explanation · OpenStax ↗
Elution ·

Removal of a component from the by the flowing .

Read explanation · Waters ↗
Endergonic

Having a positive under the stated conditions. Progress requires an energy input or coupling to a favorable process.

Read explanation · OpenStax ↗
Endothermic

Having a positive . The process absorbs heat at constant pressure when only pressure–volume occurs.

Read explanation · OpenStax ↗
Enthalpy

A quantity whose change equals heat exchanged at constant pressure when only pressure–volume occurs.

Read explanation · OpenStax ↗
Enthalpy change · ·

The difference in between and . At constant pressure with only pressure–volume , it equals the heat transferred to the system.

Read explanation · OpenStax ↗
Entropy

A measure related to the number of accessible microscopic arrangements and the dispersal of energy.

Read explanation · OpenStax ↗
Enzyme

A biological that speeds a without being consumed. Most enzymes are .

Read explanation · OpenStax ↗
Enzyme inhibitor · ·

A substance that reduces activity. The binding mechanism and rate data determine whether inhibition is competitive, uncompetitive, mixed, or another type.

Read explanation · Biology LibreTexts ↗
Enzyme saturation · ·

The high- limit in which sites spend almost all their time processing and the rate approaches .

Read explanation · Biology LibreTexts ↗
Enzyme–substrate complex · · ·

The bound association of an and its during a cycle. Often abbreviated ES in schemes.

Read explanation · OpenStax ↗
Equilibrium

A state where opposing processes occur at equal rates, so macroscopic or other properties remain constant.

Read explanation · OpenStax ↗
Equilibrium constant

A ratio of to activities at , each raised to its stoichiometric coefficient. At a fixed temperature, a does not change this ratio.

Read explanation · OpenStax ↗
Eukaryote ·

An organism whose cells have a -enclosed ; animals, plants, fungi, and protists are eukaryotes.

Read explanation · OpenStax ↗
Exergonic

Having a negative under the stated conditions. Such a is favorable but may require to proceed quickly.

Read explanation · OpenStax ↗
Experimental control ·

A comparison sample or condition used to distinguish the effect being tested from other influences.

Read explanation · Thermo Fisher ↗
FACT complex ·

A -associated complex that helps machinery traverse and supports reorganization.

Read explanation · OpenStax ↗
FAD

Flavin dinucleotide, often an -bound capable of one- or two- chemistry.

Read explanation · OpenStax ↗
Feedback inhibition

Regulation in which a pathway inhibits an earlier step, reducing further production. It commonly involves of an early committed step.

Read explanation · OpenStax ↗
Functional group

A group of whose chemical behavior gives a characteristic and properties.

Read explanation · OpenStax ↗
Gene

A sequence that contributes to a functional or , together with the information needed to express it.

Read explanation · OpenStax ↗
Gene expression

Production of a functional from a , including and, for -coding , .

Read explanation · NCBI Bookshelf ↗
Gibbs free energy · ·

A quantity used to predict whether a process is favorable at constant temperature and pressure. A negative change favors the forward process.

Read explanation · OpenStax ↗
Gibbs free energy change · ·

The change in during a process. At constant temperature and pressure, a negative value favors the forward under the stated conditions; it does not specify speed.

Read explanation · OpenStax ↗
Gradient

A change in a quantity, such as , , or density, across a distance or over time.

Read explanation · Thermo Fisher ↗
Guanine

A that pairs with through three .

Read explanation · OpenStax ↗
Histone

A -associated rich in . Core histones form the around which nucleosomal wraps.

Read explanation · OpenStax ↗
Hydrodynamic size

The effective size of a moving in , influenced by its shape and associated .

Read explanation · Cytiva ↗
Hydrogen bond ·

An attraction between a hydrogen bonded to an and another . hydrogen bonds stabilize .

Read explanation · OpenStax ↗
Hydrogen ion · ·

A positively hydrogen species. H⁺ denotes a , which is hydrated in water; its activity determines .

Read explanation · OpenStax ↗
hydrolase

An cleaving a bond through with water.

Read explanation · OpenStax ↗
Hydrolysis

Breaking a chemical bond by adding water. hydrolysis separates .

Read explanation · OpenStax ↗
Hydrophilic

Interacting favorably with water, typically because a group is or .

Read explanation · OpenStax ↗
Hydrophobic

Interacting poorly with water. often gather in a ’s interior.

Read explanation · OpenStax ↗
Hydroxide ion ·

The negatively OH⁻. Basic contain a higher hydroxide ion activity than water at the same temperature.

Read explanation · OpenStax ↗
Hydroxyl group ·

An oxygen bonded to hydrogen, –OH. Hydroxyl groups can and often increase .

Read explanation · OpenStax ↗
Hyperbolic curve ·

A curve that approaches an asymptote. The standard rate curve is a rectangular hyperbola approaching .

Read explanation · Biology LibreTexts ↗
Indole

A fused six-membered and five-membered ring system containing nitrogen; found in .

Read explanation · OpenStax ↗
Induced fit

A model in which binding changes an ’s , bringing groups into an arrangement that promotes .

Read explanation · OpenStax ↗
Initial reaction rate · · · ·

The early rate of formation, measured before substantial depletion or accumulation, usually after the brief binding transient.

Read explanation · Biology LibreTexts ↗
inversion

A rearrangement that reverses a segment’s orientation.

Read explanation · OpenStax ↗
Ion · ·

An or with a net because its numbers of and do not balance.

Read explanation · OpenStax ↗
Ionization ·

Formation of electrically or , for example before analysis in a .

Read explanation · Thermo Fisher ↗
isomerase

An rearranging a into an isomer.

Read explanation · OpenStax ↗
Kilojoule ·

A unit of energy equal to 1,000 joules. Energy changes are often reported per , in kJ/mol.

Read explanation · NIST ↗
Kinetics

The study of and the factors and mechanisms that control them. A favorable may still proceed slowly.

Read explanation · OpenStax ↗
Lineweaver–Burk plot · · · ·

A plot of 1/ against 1/. For , slope = Km/, y-intercept = 1/, and x-intercept = −1/Km.

Read explanation · Biology LibreTexts ↗
linkage

A tendency of nearby on the same to be inherited together.

Read explanation · OpenStax ↗
Lipid

A broad class of largely or , including fats, , and steroids.

Read explanation · OpenStax ↗
Lock-and-key model

A simplified model of specificity in which an ’s is already complementary to the before binding.

Read explanation · OpenStax ↗
locus

The specific position of a or other feature.

Read explanation · OpenStax ↗
Logarithm · · ·

The exponent needed to obtain a number from a chosen fixed number. For decimal logarithms, log₁₀(100) = 2 because 10² = 100; uses the negative decimal logarithm of activity.

Read explanation · OpenStax ↗
Loss of function

or elimination of a ’s normal activity.

Read explanation · NCBI Bookshelf / Sinauer Associates ↗
lyase

An catalyzing nonhydrolytic, nonoxidative bond cleavage or the reverse addition .

Read explanation · OpenStax ↗
Mass spectrometry ·

Analysis of according to their mass-to- ratios, used to identify and or .

Read explanation · Thermo Fisher ↗
Matrix

A supporting material, such as a gel or the solid support in a column. Its properties influence movement and binding of sample .

Read explanation · Thermo Fisher ↗
Maximum reaction rate · ·

The limiting as becomes saturating. For a fixed under given conditions, Vmax = times .

Read explanation · Biology LibreTexts ↗
mechanical power

Rate of energy transfer, measured in watts.

Read explanation · OpenStax ↗
mechanical work

Energy transferred by a force acting through displacement; the force component parallel to motion contributes.

Read explanation · OpenStax ↗
Membrane · · · ·

A thin boundary or sheet. Cell membranes are bilayers containing ; membranes are synthetic supports that hold or for detection.

Read explanation · OpenStax ↗
Messenger RNA ·

An that carries coding information used by to synthesize a .

Read explanation · OpenStax ↗
Methyl group ·

A –CH₃ group, consisting of one carbon bonded to three hydrogens.

Read explanation · OpenStax ↗
Michaelis constant ·

The at half for a . It has units and is not generally an .

Read explanation · IUBMB ↗
Michaelis–Menten kinetics · ·

A model with = [S]/(Km + ). Its curve is ; may require a different model.

Read explanation · Biology LibreTexts ↗
Micromolar ·

A of 10⁻⁶ moles per liter. Convert micromolar to molar when expressing in M⁻¹ s⁻¹.

Read explanation · NIST ↗
Mixed inhibition ·

binds both free and with different . Apparent decreases; apparent Km rises when free is favored and falls when is favored.

Read explanation · Biology LibreTexts ↗
Mobile phase

The moving fluid that carries a sample through a system.

Read explanation · Waters ↗
mole

Amount containing exactly 6.02214076 × 10²³ specified entities.

Read explanation · OpenStax ↗
Molecular chaperone · ·

A that assists other in folding or prevents , without specifying their sequence.

Read explanation · NCBI Bookshelf ↗
Molecule

Two or more joined by . A molecule may be electrically or carry a .

Read explanation · OpenStax ↗
Native structure · · ·

A ’s functional folded arrangement under its normal conditions.

Read explanation · NCBI Bookshelf ↗
Neutral

Having no net . For a , neutral instead means equal and activities; its is about 7 at 25 °C.

Read explanation · OpenStax ↗
Nitrogenous base · · ·

A nitrogen-containing ring component of ; its pairing interactions help specify sequences.

Read explanation · OpenStax ↗
Noncompetitive inhibition · · · ·

The equal- special case of : binds free and equally strongly. Apparent decreases while Km stays unchanged.

Read explanation · Biology LibreTexts ↗
Nonpolar ·

Lacking a substantial separation of . Nonpolar groups generally interact poorly with water.

Read explanation · OpenStax ↗
Nucleic acid

A of , such as or , used in information storage, expression, and other cellular functions.

Read explanation · OpenStax ↗
Nucleosome

The basic unit of : wrapped around a .

Read explanation · OpenStax ↗
Nucleotide

A joined to a sugar and one or more .

Read explanation · OpenStax ↗
Nucleus ·

A -enclosed compartment containing most of a cell’s .

Read explanation · OpenStax ↗
Octamer

A complex made of eight . A core contains eight .

Read explanation · OpenStax ↗
Oxidation ·

Loss of or an increase in oxidation state. Oxidizing two can form a .

Read explanation · OpenStax ↗
oxidoreductase

An catalyzing an – .

Read explanation · OpenStax ↗
Peptide

A chain of joined by ; the term commonly describes chains shorter than a typical .

Read explanation · OpenStax ↗
Peptide bond ·

A covalent between the carboxyl carbon of one and the amino nitrogen of the next.

Read explanation · OpenStax ↗
pH

A measure of , defined as the negative of activity. Lower pH means greater ; pH influences .

Read explanation · OpenStax ↗
Phenylalanine ·

A with an .

Read explanation · OpenStax ↗
Phosphate group ·

A phosphorus-containing group bonded to oxygens; phosphate groups occur in , , and modified .

Read explanation · OpenStax ↗
Phospholipid

An with a -containing region and tails; a major component of cellular .

Read explanation · OpenStax ↗
Phosphorylation

Addition of a , often to , , or in ; can regulate activity.

Read explanation · Thermo Fisher ↗
Polar

Having an uneven distribution of . Polar groups often interact favorably with water.

Read explanation · OpenStax ↗
Polymer

A large made from many linked molecular building blocks.

Read explanation · OpenStax ↗
Polypeptide

A chain of connected by . A functional can contain one or several such chains.

Read explanation · OpenStax ↗
Porous material · · · ·

A material containing small spaces that can admit of suitable size.

Read explanation · Cytiva ↗
Primer · ·

A short nucleic- strand paired with a template that provides a free for polymerase extension.

Read explanation · OpenStax ↗
Proline ·

An whose loops back to the nitrogen, restricting rotation and often creating bends.

Read explanation · OpenStax ↗
prosthetic group

Nonprotein component tightly associated with a and required for its function.

Read explanation · OpenStax ↗
Protease · ·

An that hydrolyzes in or .

Read explanation · OpenStax ↗
Protein

One or more folded chains that perform biological roles such as , transport, signaling, or structural support.

Read explanation · OpenStax ↗
Protein aggregation · ·

Association of into larger clusters, often when exposed surfaces of unfolded stick together.

Read explanation · NCBI Bookshelf ↗
Protein backbone ·

The repeating nitrogen–alpha-carbon– chain of a , excluding its variable .

Read explanation · OpenStax ↗
Proteolytic cleavage

Breaking with to process, activate, or degrade a .

Read explanation · OpenStax ↗
Proton

A positively subatomic particle. In – chemistry, donating a proton means transferring a .

Read explanation · OpenStax ↗
Protonation

Addition of a to an , , or ; this changes its by plus one.

Read explanation · OpenStax ↗
Purine · ·

A with two fused rings. and are purines.

Read explanation · OpenStax ↗
pyridoxal phosphate

A vitamin B6-derived important in and other amino- .

Read explanation · OpenStax ↗
Pyrimidine · ·

A with one six-membered ring. , , and are pyrimidines.

Read explanation · OpenStax ↗
Quantification · ·

Estimating the amount or of a substance from measured signals and suitable or .

Read explanation · Waters ↗
R group · ·

The variable side chain attached to an ’s . It determines identity, , , and chemical behavior.

Read explanation · OpenStax ↗
Rate-determining step ·

A step that strongly limits the overall rate of a ; in simple sequential mechanisms, it is the slowest step.

Read explanation · OpenStax ↗
Reactant

A starting substance transformed during a .

Read explanation · OpenStax ↗
Reaction intermediate · ·

A species formed in one step and consumed in another. It occupies a local energy minimum between .

Read explanation · OpenStax ↗
Reaction mechanism · ·

The sequence of elementary steps by which become , including any .

Read explanation · OpenStax ↗
Reaction product ·

A substance formed by a .

Read explanation · OpenStax ↗
Reaction rate · ·

How quickly are consumed or form, usually expressed as a change per unit time.

Read explanation · OpenStax ↗
Reduction

Gain of or a decrease in state. Reducing a restores two .

Read explanation · OpenStax ↗
Release factor ·

A that recognizes a stop signal and promotes of the – to release the .

Read explanation · OpenStax ↗
Ribonucleic acid ·

A with roles in , regulation, and ; carries -coding information.

Read explanation · OpenStax ↗
Ribosome ·

A complex of and that translates into a .

Read explanation · OpenStax ↗
Salt

An electrically made from and . Dissolved salts can screen or compete with – interactions.

Read explanation · Cytiva ↗
Secondary structure

Local folding, such as and , stabilized mainly by .

Read explanation · OpenStax ↗
Serine ·

A , uncharged with a -containing .

Read explanation · OpenStax ↗
Sigmoidal curve ·

An S-shaped curve. A sigmoidal rate-versus- curve can indicate rather than simple behavior.

Read explanation · Biology LibreTexts ↗
Sister chromatid

One of the two copies of a produced by . An intact sister chromatid can supply a template for accurate repair.

Read explanation · Biology LibreTexts / Oregon State University ↗
Size exclusion chromatography · ·

Separation by using beads. Large access fewer and usually before small .

Read explanation · Cytiva ↗
Solubility ·

The amount of a substance that can dissolve in a under specified conditions. Soluble means able to dissolve; insoluble means only very slightly soluble in that .

Read explanation · OpenStax ↗
Solute

A dissolved component of a .

Read explanation · OpenStax ↗
Solution

A homogeneous mixture in which are dissolved in a .

Read explanation · OpenStax ↗
Solvent

The component of a that dissolves other substances, usually the component present in the greatest amount.

Read explanation · OpenStax ↗
Stationary phase

The material that remains fixed in a system.

Read explanation · Waters ↗
Substrate

A that an binds and chemically transforms.

Read explanation · OpenStax ↗
Substrate concentration

The amount of per volume. Square brackets denote ; [S] is varied to measure an curve.

Read explanation · Biology LibreTexts ↗
Subunit ·

An individual chain within a containing multiple chains.

Read explanation · OpenStax ↗
Template strand · · ·

A preexisting strand whose sequence guides complementary nucleic- synthesis.

Read explanation · OpenStax ↗
Thermodynamics ·

The study of energy, , and . It helps determine whether a process is favorable, while concerns how fast it occurs.

Read explanation · OpenStax ↗
Thiol group · · · ·

A sulfur bonded to hydrogen, –SH. thiols can form through .

Read explanation · OpenStax ↗
Threonine ·

A , uncharged with a and a on its .

Read explanation · OpenStax ↗
Thymine

A normally used in ; it pairs with through two .

Read explanation · OpenStax ↗
Transcription

Synthesis of using a template.

Read explanation · OpenStax ↗
Transfer RNA ·

An adaptor that carries an and pairs its with a on .

Read explanation · OpenStax ↗
transferase

An transferring a from one to another.

Read explanation · OpenStax ↗
Transition state

A fleeting, high-energy arrangement at a barrier. It is an energy maximum along the path, rather than a stable .

Read explanation · OpenStax ↗
Translation ·

Synthesis of a on a using the sequence of in .

Read explanation · OpenStax ↗
translocase

class catalyzing movement of or across or their separation within .

Read explanation · iubmb.qmul.ac.uk ↗
Tryptophan ·

An with a bulky ; commonly grouped as .

Read explanation · OpenStax ↗
Turnover number · · ·

The maximum number of cycles per per unit time, calculated as /. Units are inverse time, commonly s⁻¹.

Read explanation · IUBMB ↗
Tyrosine ·

An with a phenolic . Usually uncharged near physiological .

Read explanation · OpenStax ↗
Uncompetitive inhibition ·

binds only the . In the simple model, apparent and Km decrease by the same factor, giving parallel reciprocal lines.

Read explanation · Biology LibreTexts ↗
Uracil

A normally used in in place of . Uracil produced by in is a repair target.

Read explanation · OpenStax ↗
velocity

Rate of change of position, including direction.

Read explanation · OpenStax ↗
zymogen

Inactive precursor activated, often by .

Read explanation · OpenStax ↗

Biology 2e §6.5 — Enzyme action

OpenStax · Biology 2e §6.5 — Enzyme action ↗
Opening explanation and Enzyme Active Site and Substrate Specificity, including Induced Fit and Enzyme Function. Enzyme regulation is outside this selection.

A substance that helps a to occur is a , and the special that catalyze biochemical are . Almost all are , comprised of chains, and they perform the critical task of lowering the activation energies of chemical inside the cell. do this by binding to the , and holding them in such a way as to make the chemical bond-breaking and bond-forming processes take place more readily. It is important to remember that do not change the 's . In other words, they do not change whether a is (spontaneous) or . This is because they do not change the ' or ' . They only reduce the required to reach the (Figure 6.15).

This plot shows that a catalyst decreases the activation energy for a reaction but does not change the Gibbs free energy.
lower

Figure 6.15 Enzymes lower the reaction's activation energy but do not change the reaction's free energy.

Mary Ann Clark, Matthew Douglas, and Jung Choi, Biology 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

and Specificity

The chemical to which an binds are the ’s . There may be one or more , depending on the particular . In some , a single- breaks down into multiple . In others, two may come together to create one larger . Two might also enter a , both become modified, and leave the as two . The location within the where the binds is the ’s . This is where the “action” happens. Since are , there is a unique combination of (also , or ) within the . Different properties characterize each . These can be large or small, weakly or basic, or , positively or negatively , or . The unique combination of , their positions, sequences, structures, and properties, creates a very specific chemical environment within the . This specific environment is suited to bind, albeit briefly, to a specific chemical (or ). Due to this jigsaw puzzle-like match between an and its (which adapts to find the best fit between the and the ), are known for their specificity. The “best fit” results from the shape and the ’s attraction to the . There is a specifically matched for each and, thus, for each ; however, there is flexibility as well.

The that are so perfectly suited to provide specific environmental conditions also means that they are subject to local environmental influences. It is true that increasing the environmental temperature generally increases , -catalyzed or otherwise. However, increasing or decreasing the temperature outside of an optimal range can affect chemical bonds within the in such a way that they are less well suited to bind . High temperatures will eventually cause , like other biological , to , a process that changes the substance's natural properties. Likewise, the local environment's can also affect function. have their own or basic properties that are optimal for . These are sensitive to changes in that can impair the way bind. are suited to function best within a certain range, and, as with temperature, extreme environmental values ( or basic) can cause to .

and Function

For many years, scientists thought that - binding took place in a simple “” fashion. This model asserted that the and fit together perfectly in one instantaneous step. However, current research supports a more refined view scientists call (Figure 6.16). This model expands upon the by describing a more dynamic interaction between and . As the and come together, their interaction causes a mild shift in the ’s structure that confirms an ideal binding arrangement between the and the 's . This ideal binding maximizes the ’s ability to catalyze its .

Link to Learning

View an animation at this website.

When an binds its , it forms an . This complex lowers the 's and promotes its rapid progression in one of many ways. On a basic level, promote chemical that involve more than one by bringing the together in an optimal orientation. The appropriate region ( and bonds) of one is juxtaposed to the other 's appropriate region with which it must react. Another way in which promote is by creating an optimal environment within the for the to occur. Certain chemical might proceed best in a slightly or environment. The chemical properties that emerge from the particular arrangement of within an create the perfect environment for an ’s specific to react.

You have learned that the required for many includes the energy involved in manipulating or slightly contorting chemical bonds so that they can easily break and allow others to reform. Enzymatic action can aid this process. The can lower the by contorting in such a way as to facilitate bond-breaking, helping to reach the . Finally, can also lower activation energies by taking part in the itself. The can provide certain or chemical groups that actually form with as a necessary step of the process. In these cases, it is important to remember that the will always return to its original state at the 's completion. One of ' hallmark properties is that they remain ultimately unchanged by the they catalyze. After an catalyzes a , it releases its (s).

In this diagram, a substrate binds the active site of an enzyme and, in the process, both the shape of the enzyme and the shape of the substrate change. The substrate is converted to products that then leave the enzymes active site.
binding and

Figure 6.16 According to the induced-fit model, both enzyme and substrate undergo dynamic conformational changes upon binding. The enzyme contorts the substrate into its transition state, thereby increasing the reaction's rate.

Mary Ann Clark, Matthew Douglas, and Jung Choi, Biology 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Chemistry 2e §12.7 — Catalysis and reaction diagrams

OpenStax · Chemistry 2e §12.7 — Catalysis and reaction diagrams ↗
Opening explanation through Example 12.15 and its Check Your Learning exercise. Later sections on homogeneous and heterogeneous catalysts are outside this selection.

Among the factors affecting rates discussed earlier in this chapter was the presence of a , a substance that can increase the without being consumed in the . The concepts introduced in the previous section on provide the basis for understanding how are able to accomplish this very important function.

Figure 12.19 shows diagrams for a chemical process in the absence and presence of a . Inspection of the diagrams reveals several traits of these . Consistent with the that the two diagrams represent the same overall , both curves begin and end at the same energies (in this case, because are more energetic than , the is ). The , however, are clearly different. The uncatalyzed proceeds via a one-step mechanism (one observed), whereas the catalyzed follows a two-step mechanism (two observed) with a notably lesser . This difference illustrates the means by which a functions to accelerate , namely, by providing an alternative with a lower . Although the catalyzed for a needn’t necessarily involve a different number of steps than the uncatalyzed mechanism, it must provide a path whose is faster (lower Ea).

A graph is shown with the label, “Extent of reaction,” appearing in a right pointing arrow below the x-axis and the label, “Energy,” in an upward pointing arrow just left of the y-axis. Approximately one-fifth of the way up the y-axis, a very short, somewhat flattened portion of both a red and a blue curve are shown. This region is labeled “Reactants.” A red concave down curve extends upward to reach a maximum near the height of the y-axis. From the peak, the curve continues downward to a second horizontally flattened region at a height of about one-third the height of the y-axis. This flattened region is labeled, “Products.” A second curve is drawn in blue with the same flattened regions at the start and end of the curve. The height of this curve is about two-thirds the height of the first curve and just right of its maximum, the curve dips low, then rises back and continues a downward trend at a lower height, but similar to that of the red curve. A horizontal dashed straight line extends from the point where both curves start in the “Reactants” region. A double sided arrow extends from the “Products” region at the end of both curves to this horizontal dashed line. This is labeled “capital delta H.” A double sided arrow extends from the dashed horizontal line to the peak of the red concave down curve. This arrow is labeled “E subscript a.” Another double sided arrow extends from the dashed horizontal line to the peak of the blue curve. This arrow is labeled “E subscript a.”
A changes the

Figure 12.19 Reaction diagrams for an endothermic process in the absence (red curve) and presence (blue curve) of a catalyst. The catalyzed pathway involves a two-step mechanism (note the presence of two transition states) and an intermediate species (represented by the valley between the two transitions states).

Paul Flowers, Klaus Theopold, Richard Langley, and William R. Robinson, Chemistry 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Example 12.15

Diagrams for Catalyzed

The two diagrams here represent the same : one without a and one with a . Estimate the for each process, and identify which one involves a .
In this figure, two graphs are shown. The x-axes are labeled, “Extent of reaction,” and the y-axes are labeled, “Energy ( k J ).” The y-axes are marked off from 0 to 50 in intervals of five. In a, a blue curve is shown. It begins with a horizontal segment at about 6. The curve then rises sharply near the middle to reach a maximum of about 32 and similarly falls to another horizontal segment at about 10. In b, the curve begins and ends similarly, but the maximum reached near the center of the graph is only 20.
Example 12.15: comparing activation energies Paul Flowers, Klaus Theopold, Richard Langley, and William R. Robinson, Chemistry 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Activation energies are calculated by subtracting the energy from the energy.
diagram (a):Ea=32kJ−6kJ=26kJ diagram (b):Ea=20kJ−6kJ=14kJ

The catalyzed is the one with lesser , in this case represented by diagram b.

Check Your Learning

diagrams for a chemical process with and without a are shown below. Both involve a two-step mechanism with a rate-determining first step. Compute activation energies for the first step of each mechanism, and identify which corresponds to the catalyzed . How do the second steps of these two mechanisms compare?
In this figure, two graphs are shown. The x-axes are labeled, “Extent of reaction,” and the y-axes are labeledc “Energy (k J).” The y-axes are marked off from 0 to 100 at intervals of 10. In a, a blue curve is shown. It begins with a horizontal segment at about 10. The curve then rises sharply near the middle to reach a maximum of about 91, then sharply falls to about 52, again rises sharply to about 73 and falls to another horizontal segment at about 5. In b, the curve begins and ends similarly, but the first peak reaches about 81, drops to about 55, then rises to about 77 before falling to the horizontal region at about 5.
Check Your Learning: two-step Paul Flowers, Klaus Theopold, Richard Langley, and William R. Robinson, Chemistry 2e, OpenStax. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Answer:

For the first step, Ea = 80 for (a) and 70 for (b), so diagram (b) depicts the catalyzed . Activation energies for the second steps of both mechanisms are the same, 20 .

Biochemistry Free For All §4.1 — Enzyme kinetics

Biology LibreTexts · Biochemistry Free For All §4.1 — Enzyme kinetics ↗
Selected sections: Enzyme kinetics; Experimental considerations through Amazing Kcat values; Diffusion limitation; Lineweaver-Burk plots and Double reciprocal. Other sections are outside this selection.

To understand how an enhances the rate of a , we must understand . We present a model here proposed by Leonor Michaelis and Maud Menten. In order to understand the model, it is necessary to understand a few parameters.

First, we describe a in simple terms proceeding as follows

E + S ⇄ -> E + P

where E is , S is , and P is . In this scheme, is the , which is simply the bound to its .

We could define the state a bit further with

E + S ⇄ -> * -> EP -> E + P

where * is the activated state and EP is the - complex before release of the .

The first consideration we have is . The of a is the rate of creation of over time, measured as the of per time. The time is a critical consideration when measuring . In a closed system (in which an operates), all will advance towards . Enzymatically catalyzed are no different in the end result from non-enzymatic , except that they get to faster.

Experimental considerations

Now we turn our attention to how studies of the properties of an are conducted. To perform an analysis, one would do the following experiment - 20 different tubes would be set up with (to keep the stable), the same amount of , and then a different amount of in each tube, ranging from tiny amounts in the first tubes to very large amounts in the last tubes. The would be allowed to proceed for a fixed, short amount of time and then the would be stopped and the amount of contained in each tube would be determined.

The () of the then would be the of found in each tube divided by the time that the was allowed to run. Data from the experiment would be plotted on a graph using () on the Y-axis and the of on the X-axis, each tube, of course having a unique corresponding to a unique .

For an following , a curve like that shown in Figure 4.18 or 4.19 would result. At low of , it is limiting and the converts it into as soon as it can bind it. Consequently, at low of , the rate of increase of [P] is almost linear with (Figure 4.19).

Initial reaction rate rises with substrate concentration and approaches a plateau.
curve

Figure 4.18 - Kinetics of an enzyme obeying Michaelis-Menten kinetics. Image by Aleia Kim

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. Image by Aleia Kim · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗
Product concentration rises approximately linearly at low substrate concentration when measured after a fixed short reaction time.
formation at low

Figure 4.19 - Linear relationship between [P] and [S] at low [S]

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Non-linear increase

As the increases, however, the of the in tubes with higher ceases to increase linearly and instead begins to flatten out, indicating that as the gets higher and higher, the has a harder time keeping up to convert the to .

Not surprisingly, when the becomes completely , it will not have to wait for to diffuse to it and will therefore be operating at maximum .

For an following will have its (v) at any given given by the following equation:

Initial rate equals Vmax times substrate concentration divided by Km plus substrate concentration.
equation Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Vmax

Two terms in the equation above require explanation. The first is Vmax. It refers to the maximum of an enzymatic . Maximum for a occurs when an is . is important because it means (per the assumption above) that none of the are “waiting” for after a is released. ensures that another is always instantly available. The unit of Vmax is of per time = [P]/time.

On a plot of versus ( vs. ), Vmax is the value on the Y axis that the curve asymptotically approaches (dotted line in Figure 4.20). It should be noted that the value of Vmax depends on the amount of used in a . If you double the amount of used, you will double the Vmax. If one wanted to compare the velocities of two different , it would be necessary to use the same amounts of in the each one catalyzes.

A saturation curve marks Vmax, half Vmax, and the corresponding substrate concentration Km.
Reading and Km

Figure 4.20 - Vmax, Vmax/2, and Km

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Km

The second term is Km (also known as Ks). Referred to as the , Km is the that causes the to at half of maximum (/2). What it measures, in simple terms, is the an has for its . The value of Km is inversely related to the of the for its . with a high Km value will have a lower for their (will take more to get to /2) whereas those with a low Km will have high and take less to get to /2. The unit of Km is .

of for vary considerably, so knowing Km helps us to understand how well an is suited to the being used. Measurement of Km depends on the measurement of .

Common mistake

A common mistake students make in describing is saying that Km = /2. This is, of course, not true. Km is a and is the amount of it takes for an to reach /2. On the other hand /2 is a and a certainly cannot equal a .

It is desirable to have a measure of that is independent of . Remember that depended on the amount of used. For this, we use the , also known as the . is a number that requires one to first determine for an and then divide the by the of used to determine . Thus,

= /[]

Since has units of per time and [] has units of , the units on are time-1. While that might seem unintuitive, it means that the value of is the number of of made by each of in the time given. So, a value of 1000/ means each in the at is producing 1000 of per second. Note that since is a calculated value, it cannot be read from a V vs graph as and Km can.

An original table image compares turnover numbers for several enzymes.
Turnover numbers for several

Figure 4.21 - Kcat (turnover number) values for several enzymes. Image by Aleia Kim

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. Image by Aleia Kim · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Amazing values

A value of 1000 of per per second might seem like a high value, but there are known (, for example) that have a value of over 600,000/second (Figure 4.21). This astonishing value illustrates clearly why seem almost magical in their action. In contrast to , which varies with the amount of used, is a constant for an under given conditions.

As seen earlier, that follow produce plots of () versus (Figure 4.18). Not all , though, follow . Many have multiple and these sometimes interact differently upon binding of a or an external . See ATCase (HERE) for an example.

limitation

Why should there be a maximum possible value of ? The answer is that movement of to the becomes the limiting factor for perfect . Movement of by in water has a fixed rate at any temperature and that limitation ultimately determines the maximum speed an can catalyze at. In a macroscopic world analogy, factories can’t make faster than suppliers can deliver materials. It is safe to say for a perfect that the only speed limit it has is the rate of in water.

Given the “magic” of alluded to earlier, it might seem that all should have evolved to be “perfect.” There are very good reasons why most of them have not.

plots

The study of is typically the most math intensive component of biochemistry and one of the most daunting aspects of the subject for many students. Although attempts are made to simplify the mathematical considerations, sometimes they only serve to confuse or frustrate students. Such is the case with modified plots, such as Lineweaver-Burk (Figure 4.26).

Indeed, when presented by professors as simply another thing to memorize, who can blame students? In reality, both of these plots are aimed at simplifying the of parameters, such as Km and . In making either of these modified plots, it is important to recognize that the same data is used as in making a vs. plot. The data are simply manipulated to make the plotting easier.

A double-reciprocal plot marks the slope Km/Vmax, y-intercept 1/Vmax, and x-intercept minus 1/Km.

Figure 4.26 - A Lineweaver-Burk plot of 1/V₀ vs 1/[S]. Image by Aleia Kim

Kevin Ahern, Indira Rajagopal, and Taralyn Tan, Biochemistry Free For All, Oregon State University, via Biology LibreTexts. Image by Aleia Kim · CC BY-NC-SA 4.0 · Original image ↗ · Access for free ↗

Double reciprocal

For a plot, the manipulation is using the reciprocal of the values of both the and the . The inverted values are then plotted on a graph as 1/ vs. 1/. Because of these , plots are commonly referred to as ‘double-reciprocal’ plots. As can be seen in Figure 4.26, the value of Km on a plot is easily determined as the negative reciprocal of the x-intercept , whereas the is the inverse of the y-intercept. Other related manipulation of data include Eadie-Hofstee diagrams, which plots vs / and gives as the Y-axis intercept with the slope of the line being -Km.